3-47
DNW-A220
DNW-A220P
Calendar/clock setting
The calendar/clock’s date and time of this unit can be adjusted in the setting mode as
described below.
In a display/operation example on the right, 9:23 of July 3rd in 1996 is set to 15:00
of August 1st in 1996.
(1) Turn the JOG dial slowly and turn on and off the numerical value (year, month,
day, hour, minute, or second) of the calendar/clock item to be changed.
m
.
When a
*
mark is displayed in the setting menu, turn the JOG dial continu-
ously in FORWARD (
2
) direction until the numerical value blinks. For the
calendar/clock setting, a
*
mark is not displayed on the LCD monitor.
.
Do not turn the JOG dial excessively in REVERSE (
3
) direction during
setting. An
*
mark is displayed in the setting menu and the calendar/clock
setting is stopped.
(2) Turn the JOG dial while pressing the search button and change the numerical
value to the desired one.
m
.
The count display of seconds stops when the numerical value is changed.
The internal data is updated.
.
On the LCD monitor, message “Push SET Button” is displayed in the upper
line.
(3) Repeat steps (1) and (2) until the numerical values in other items are changed
completely.
(4) Push the SET button to save the setting values.
m
.
To change only the date, the time must also be set again.
.
To cancel the calendar/clock setting, terminate the setting mode or turn the
JOG dial in REVERSE (
3
) direction until a
*
mark is displayed in the setting
menu (the setting menu item is displayed for a sub LCD).
.
The unit enters the normal operation state when the SET button is pushed
with message “Push SET Button” not displayed on the LCD monitor. Push
the MENU button to return to the former state.
.
To set the time accurately, push the SET button immediately the display and
current time coincided.
(5) Push the MENU button to terminate the setting mode.
3-4. Error Logger Display Mode (M2)
3-3-3. Setting Mode
Example of display
and operation
ERROR LOGGER
(001/003)
001 REEL TROUBLE-1
002 TAPE TENSION ERROR
003 INTERNAL I/F ERROR
TAPE ERROR ON
WARNING ON
CONDITION ON
'96 07 03 09:23:24
*
0
DIAL (
2
)
CONDITION ON
'96 07 03 09:23:25
0
DIAL (
2
)
CONDITION ON
'96 07 03 09:23:25
0
[Search]
+
DIAL (
2
)
CONDITION ON
Push SET button
'96 08 03 09:23:25
0
DIAL (
2
)
CONDITION ON
Push SET button
'96 08 03 09:23:25
0
[Search]
+
DIAL (
3
)
CONDITION ON
Push SET button
'96 08 01 09:23:25
0
DIAL (
2
)
CONDITION ON
Push SET button
'96 08 01 09:23:25
0
[Search]
+
DIAL (
2
)
CONDITION ON
Push SET button
'96 08 01 15:23:25
0
DIAL (
2
)
CONDITION ON
Push SET button
'96 08 01 15:23:25
0
[Search]
+
DIAL (
3
)
CONDITION ON
Push SET button
'96 08 01 15:00:25
0
DIAL (
2
)
CONDITION ON
Push SET button
'96 08 01 15:00:25
0
[Search]
+
DIAL (
3
)
CONDITION ON
Push SET button
'96 08 01 15:00:00
0
[SET]
CONDITION ON
'96 08 01 15:00:00
0
CONDITION ON
'96 08 01 15:00:01
