manualshive.com logo in svg

Sony DNW-A220, Maintenance Manual, Page: 147 / 190

Share
Download
Sony DNW-A220 Maintenance Manual Download Page 147

4-9

DNW-A220

DNW-A220P

4-3. Cares After Outdoor Use

After using the unit outdoors (especially dusty areas, seaside, sandy beach or the like), it is recommended

to do the following items.

1.

Dust off the hinges, packing portion and movements of the display panel and control panel using a

vacuum cleaner.

2.

Clean off sand and other dust in the unit carefully.

3.

Clean the video heads, upper and lower drums and stationary heads. (Refer to Sections 4-2-3, 4-2-4,

4-2-5)

4.

Clean the tape running surfaces (tape guides, capstan shaft and pinch roller). (Refer to Section 4-2-6.)

5.

Clean the connectors on the connector panel.

6.

Carry out the common operation check (REC, PLAY etc.) and check that the unit has not an abnor-

mal sound or action.

If the unit has an abnormal condition, please consult your local Sony’s sales/service office.

4-3. Cares After Outdoor Use

Cares After Outdoor Use

Movements of 
the display panel

Hinges portion

Movements of 
the control panel

Packing portion

Connectors

Summary of Contents for DNW-A220































































































































































































Reviews:

No comments