Sony BVH-2000, Operation And Maintenance Manual

Page: 55 / 505

@
VAR (variable) button
When the VAR button on the BVH-2000(02) is pressed,
the lamp and enters PROGRAM
JOG or PLAY mode. These modes are
selected by the V AR switch on the SY-79 board.
PROGRAM JOG mode:
set to the P.JOG position, pushing the VAR button
places the machine in the PROGRAM JOG mode.
If is to and
the rotation is stopped at any position, playback
will be at a speed (-1 to +3 times normal) corre-
sponding to the dial position. The dial clicks at the
0, the
BVH-2000(02) is used, noiseless playback is possible
over the entire range (-1 to +3 times normal) of the
in by the
to the PLAY position. This mode is also available as
a vernier function in the usual SHUTTLE mode
(-50 to +50 times The speed can to
rouowmz 50
-1 time normal 0
21 steps 21 steps 8 steps
V AR button and button can turn mode
into PROGRAM PLAY if pushed altogether after
setting the VAR switch on the SY-79 board to
P .PL Y. the left or
right pushing at the same time the V AR button and
stop at the position desired, and playback is per-
position For the BVH-2000(02)
which is equipped with dynamic tracking function,
noiseless is in this mode in the
the range.
This mode can be used, in the same way as above, as
a vernier function in the usual SHUTTLE mode.
the normal PLAY speed.
-20% normal PLAY speed
+20%
0.1
%
steps 0.1
%
steps
Tape presetting is possible by turning the
SEARCH dial with the V AR button pressed in
STOP, STANDBY, PLAY or REC mode. After
setting, by
pushing the PLAY button and V AR button at the
same time.
The set on on
display PROGRAM JOG speed is displayed as a
fraction or decimal point and PROGRAM PLAY
as
%.
1-45
VAR
(variable)
MEMORY
button
The SEARCH dial operations (change of speed and
tape PROGRAM are
memorized, so that the operations stored can be per-
formed again.
( ) Press both the AUTO MODE and V AR MEMORY
(2) Start the tape running and store the start point to
be memorized using the ENTRY IN button.
the ...,.....
.L .................
JL ...
Press the PREROLL and
buttons simultaneously.
The tape will run at the preset initial speed.
the point, buzzer rings.
After that, when the SEARCH dial is operated, the
operation curve of the dial is memorized.
Press the PREVIEW button and the changes of the
SEARCH dial from the start to stop points will be
... """t-" ... '-", ..... ~ ...
,F""'~
and the tape according to the
change curve.
• The VAR MEMORY button lamp flashes untill the
change curve memory becomes full.
further dial operations cannot be stored.
• On the BVH-2000(00), the noiseless playback is
When PRE ROLL button is tape
runs to the point, [IN-point -preroll time (second)
x initial speed], and stops. To start playback, press
the At
the preset initial speed is obtained and the playback
at the memorized speed continues.
z
o
~
0:
l1J
'I
0-
o