(4-14-2. Function of TEST-1 Switch S4/CD-17)
TEST-l
"5":
Solenoid/Motor
Check
It is possible to check the solenoid and motor in accordance
with the setting of the TEST-2 switch S5.
TEST-l
"5"
&
TEST-2
"0":
Mode Off
Set the switch to this position when not performing
the
test.
TEST-l
"5"
& TEST-2
"I":
Pinch Roller Pressure
In the case
""1",
the drum, capstan and Sand
reel motors will rotate, however for this test mode,
the capstan motor will rotate, and the pinch roller will be
pressed against the capstan.
Refer to section 3 for adjustment
procedure.
z
o
i=
«
~
a:
o
u,
Z
Solenoid
The pinch solenoid turns on and off every one second, or
so.
TEST-l
"5"
& TEST-2
"3":
Brake Solenoid
The S and
reel brake solenoid turns on and off
one second,
so.
w
U
>
a:
w
C/)
~
TEST-l
"5"
& TEST-2
"4":
Mini Arm Solenoid
The mini tension arm solenoid turns on and off every one
second, or so.
"5":
Roller Motor
The IP roller motor turns on and off every one second, or
so.
TEST-l
"5"
&
TEST-2
"6": Not used.
I'hreadmz
Motor
The movable guide opens and closes every four seconds,
or so.
TEST-l
"5"
&
TEST-2
"8": Not used.
"5"
Not used.
TEST-l
"5" & TEST-2
"A": Not used.
TEST-l
"5"
&
TEST-2
"B": Capstan
Motor
The capstan
rotates.
TEST-l
"5"
TEST-2
"C": Not used.
TEST-l
"5"
&
TEST-2
"D": Drum Motor
The drum rotates.
TEST-l
"5"
&
TEST-2
"E": Not used.
TEST-l
"5"
TEST-2
"F": Not used.
TEST-l
"6": Not used.
TEST-l
"7": Not used.
TEST-l
"8": Not used.
Not used.
TEST-l
"A": Not used.
TEST-l
"B"
TEST-l
"C,,: Tape Speed Check
This test permits the following checks to establish whether or
not the tape
of
in the
mode is the same as that in the RECORD
mode.
Step 1.
Thread the alignment tape. Set the TEST-l switch to "B"
and press the ENTRY switch. (The capstan phase lock
will go open, and the capstan
will be the same
as that in the RECORD
mode.)
Step 2.
Place the machine in the PLAY mode, and memorize the
NDI display on the SV-43 board.
3.
Set the TEST-l
switch to "C", and press the ENTRY
switch. (The capstan is driven only by the analog velocity
loop consisting
of hardware.)
Step 4.
Place the machine in the PLAY mode, and check to see if
value
on the NO
I
is the same as
value
memorized
in step 2. If it is not adjust
0
RVI on the CD-
17 board in the TEST-l
"C"
mode.
Drum
Check
In this test the drum speed can be checked by the NDI
display on the SV-43 board as follows.
Set the TEST-I switch to
"0",
press the ENTRY switch, and
place the machine in the STANDBY ON mode. (The drum
driven
the
of
hardware.)
the NDI display on the SV-43 board shows
"02", "01", "00", ~~FF", "FE" or "FD", the drum speed is
within the specifications.
If the display is different to the above, adjust
0
RV4 on the
CD-17 board.
TEST-l
"E": Real Time Display of Status
This test enables the servo status flag, and so on, of the servo
ooeraunz
in the normal mode to be
in real time,
on NOlan
the SV-43 board for the TEST-2 switch
or
on the
8
LEOs display on the RL-12 board for the TEST-3
switch setting. For details, refer to the item on the TEST-2
switch and the TEST-3 switch.
TEST -1 "F": Not used.
4-58
BVH-2000(U/C)/PS/PM
BVH-2180(U/C)/PS/PM
Summary of Contents for BVH-2000
