Sony BVH-2000, Operation And Maintenance Manual

Page: 23 / 505

these can troIs so
that the meter pointers of the AUDIO-l/2/3
meters indicate 0 VU at the peak.
PUSH: This the preset position.
• AUDIO-3 meter be used indicate the
MIC input level from the MIC INPUT connector on
the rear panel. The LINE input and MIC input are
selected.
the A-3 SEL switch on the AE-03 board
is TC mode the
time code input selector to INT or EXT-l, the
AUDIO-3 REC control is inoperative.
channels and simultaneously
output from the AUDIO-l/2 LINE OUTPUT
connectors. The adjustable
±6
dB
which has the
@
AUDIO MONITOR select buttons
These buttons are used to select the signals, fed to the
Audio
channel
L
R Select
button
AUDIO·2 AUDIO·2
AUDIO-l
AUDIO·2
AUDIO·2
@
PICTURE MONITOR select buttons
These are used to select signals fed
DEMOD OUT:
connected
to
can ..
nectar.
the
the SPARE INPUT signal
ting the SI on the VM-Ol
(Refer to 1-4-6.)
selector is
selector is returned to position than
INPUT, the signal previously selected is output.
@
WAVEFORM MONITOR select buttons
the
connector on the
SELECT VIDEO: For the output signal selected by
the PICTURE MONITOR select
buttons
@.
CTL: For the of
RF ENVELOPE: For the RF envelope signal of the
FM
carrier played back by the
video head.
SPARE:
@
level
This is used to control the listening level of the
headphones or the output level of the AUDIO
MONITOR OUTPUT connectors on the rear panel.
MONITOR select buttons can be monitored
through the headphones. When the headphones are
disconnected, the audio signals are supplied to the
AUDIO MONITOR OUTPUT connectors.
to
1-13
z
o
I-
«
n;
w
0...
o