SNR S2940-8G-v2, Configuration Manual

Page: 67 / 420

SNR S2940-8G-v2 Switch Configuration Guide
LLDP Function Operation Configuration
9. Configure the optional information-sending attribute of the port
Command Explanation
Global mode
lldp transmit optional tlv [port-
Desc]
[sysName] [sysDesc]
[sysCap]
no lldp transmit optional tlv
Configure the optional information-sending attribute of the
port as the option value of default values.
10. Configure the size of space to store Remote Table of the port
Command Explanation
Port configuration mode
lldp neighbors max-num < value
>
no lldp neighbors max-num Configure the size of space to store Remote Table of the
port as the specified value or default value.
11. Configure the type of operation when the Remote Table of the port is full
Command Explanation
Port configuration mode
lldp tooManyNeighbors { discard
| delete } Configure the type of operation when the Remote Table of
the port is full.
12. Display and debug the relative information of LLDP
Command Explanation
Admin, Global mode
show lldp Display the current LLDP configuration information.
show lldp interface ethernet <IF-
NAME> Display the LLDP configuration information of the current
port.
show lldp traffic Display the information of all kinds of counters.
show lldp neighbors interface
ethernet < IFNAME > Display the information of LLDP neighbors of the current
port.
show debugging lldp Display all ports with LLDP debug enabled.
Admin mode
debug lldp Enable or disable the DEBUG switch.
no debug lldp
debug lldp packets interface eth-
ernet <IFNAME>
Enable or disable the DEBUG packet-receiving and sending
function in port or global mode.
no debug lldp packets interface
ethernet <IFNAME>
Port configuration mode
clear lldp remote-table Clear Remote-table of the port.
67