SNR S2940-8G-v2, Configuration Manual

Page: 371 / 420

SNR S2940-8G-v2 Switch Configuration Guide
SAVI Configuration
9. Configure IPv6 address prefix for a link
10. Configure the filter entry number of IPv6 address
11. Configure the check mode for SAVI conflict binding
12. Enable or disable user authentication
13. Enable or disable DHCPv6 trust of port
14. Enable or disable ND trust of port
15. Configure the binding number
1. Enable or disable SAVI function
Command Explanation
Global Mode
savi enable
no savi enable Enable the global SAVI function, no com-
mand disables the function.
2. Enable or disable application scene function for SAVI
Command Explanation
Global Mode
savi ipv6 { dhcp-only | slaac-only | dhcp-slaac }
enable
no savi ipv6 { dhcp-only | slaac-only | dhcp-slaac
} enable Enable the application scene function for
SAVI, no command disables the function.
3. Configure SAVI binding function
Command Explanation
Global Mode
savi ipv6 check source binding ip <ip-address>
mac <mac-address> interface <if-name> { type [
slaac | dhcp ] lifetime <lifetime> | type static }
no savi ipv6 check source binding ip <ip-
address> interface <if-name> Configure a static or dynamic binding man-
ually, no command deletes the configured
binding. This command may be configured
in a global function of savi enable, slaac-
only enable, dhcp-only enable or dhcp-
slaac enable.
4. Configure the global max-dad-delay for SAVI
Command Explanation
Global Mode
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay Configure the max lifetime period of SAVI
binding at DETECTION state, no command
restores the default value.
5. Configure the global max-dad-prepare-delay for SAVI
371