SNR S2940-8G-v2, Configuration Manual

Page: 330 / 420

SNR S2940-8G-v2 Switch Configuration Guide
Operational Configuration of AM Function
1. Enable AM function
Command Explanation
Global Mode
am enable
no am enable Globally enable or disable AM function.
2. Enable AM function on an interface
Command Explanation
Port Mode
am port
no am port Enable/disable AM function on the port. When the AM
function is enabled on the port, no IP or ARP message
will be forwarded by default.
3. Configure the forwarding IP
Command Explanation
Port Mode
am ip-pool <ip-address> <num>
no am ip-pool <ip-address> <num> Configure the forwarding IP of the port.
4. Configure the forwarding MAC-IP
Command Explanation
Port Mode
am mac-ip-pool <mac-address> <ip-
address>
no am mac-ip-pool <mac-address>
<ip-address> Configure the forwarding MAC-IP of the port.
5. Delete all of the configured IP or MAC-IP or both
Command Explanation
Global Mode
no am all [ ip-pool | mac-ip-pool ] Delete MAC-IP address pool or IP address pool or both
pools configured by all users.
6. Display relative configuration information of AM
Command Explanation
Global Configuration Mode
show am [ interface <interface-name>
] Display the AM configuration information of one port or
all ports.
330