SNR S2940-8G-v2, Configuration Manual

Page: 380 / 420

SNR S2940-8G-v2 Switch Configuration Guide
MRPP Configuration
2. Configure MRPP ring
Command Explanation
Global Mode
mrpp ring <ring-id>
no mrpp ring <ring-id> Create MRPP ring. The 'no' command deletes
MRPP ring and its configuration.
MRPP ring mode
control-vlan <vid>
no control-vlan Configure control VLAN ID, format 'no' deletes
configured control VLAN ID.
node-mode { master | transit } Configure node type of MRPP ring (primary node
or secondary node).
hello-timer < timer>
no hello-timer Configure Hello packet timer sending from pri-
mary node of MRPP ring, format 'no' restores de-
fault timer value.
fail-timer <timer>
no fail-timer Configure Hello packet overtime timer sending
from primary node of MRPP ring, format 'no' re-
stores default timer value.
enable
no enable Enable MRPP ring, format 'no' disables enabled
MRPP ring.
Port mode
mrpp ring <ring-id> primary-port
no mrpp ring <ring-id> primary-port Specify primary port of MRPP ring.
mrpp ring <ring-id> secondary-port
no mrpp ring <ring-id> secondary-port Specify secondary port of MRPP ring.
3. Configure the query time of MRPP
Command Explanation
Global Mode
mrpp poll-time <20-2000> Configure the query interval of MRPP.
4. Configure the compatible mode
Command Explanation
Global Mode
mrpp errp compatible
no mrpp errp compatible Enable the compatible mode for ERRP, the no
command disables the compatible mode.
mrpp eaps compatible
no mrpp eaps compatible Enable the compatible mode for EAPS, the no
command disables the compatible mode.
errp domain <domain-id>
no errp domain <domain-id> Create ERRP domain, the no command deletes
the configured ERRP domain.
380