SNR S2940-8G-v2, Configuration Manual

Page: 44 / 420

SNR S2940-8G-v2 Switch Configuration Guide
Basic Switch Configuration
nos.img file length = 1526021
read file ok
send file
150 Opening ASCII mode data connection for nos.img.
226 Transfer complete.
close ftp client.
• The following is the message displays when files are successfully received. Otherwise,
please verify link connectivity and retry 'copy' command again.
220 Serv-U FTP-Server v2.5 build 6 for WinSock ready...
331 User name okay, need password.
230 User logged in, proceed.
200 PORT Command successful.
recv total = 1526037
************************
write ok
150 Opening ASCII mode data connection for nos.img (1526037 bytes).
226 Transfer complete.
• If the switch is upgrading system file or system start up file through FTP, the switch must
not be restarted until 'close ftp client' or '226 Transfer complete.' is displayed, indicating
upgrade is successful, otherwise the switch may be rendered unable to start. If the system
file and system start up file upgrade through FTP fails, please try to upgrade again or use
the BootROM mode to upgrade.
TFTP Troubleshooting When upload/download system file with TFTP protocol, the connectivity
of the link must be ensured, i.e., use the 'Ping' command to verify the connectivity between the
TFTP client and server before running the TFTP program. If ping fails, you will need to check for
appropriate troubleshooting information to recover the link connectivity.
• The following is the message displays when files are successfully transferred. Otherwise,
please verify link connectivity and retry 'copy' command again.
nos.img file length = 1526021
read file ok
begin to send file, wait...
file transfers complete.
Close tftp client.
• The following is the message displays when files are successfully received. Otherwise,
please verify link connectivity and retry 'copy' command again.
begin to receive file, wait...
recv 1526037
************************
write ok
transfer complete
close tftp client.
44