SNR S2940-8G-v2, Configuration Manual

Page: 229 / 420

SNR S2940-8G-v2 Switch Configuration Guide
DHCPv6 Configuration
1. To enable/disable DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6 To enable DHCPv6 service.
2. To configure DHCPv6 address pool
(a) To achieve/delete DHCPv6 address pool
Command Explanation
Global Mode
ipv6 dhcp pool <poolname>
no ipv6 dhcp pool <poolname> To configure DHCPv6 address pool.
(b)To configure parameter of DHCPv6 address pool
Command Explanation
DHCPv6 address pool Configuration Mode
network-address <ipv6-pool-
start-address> { <ipv6-pool-
end-address> | <prefix-length> }
[eui-64]
no network-address
To configure the range of IPv6 address assignable of ad-
dress pool.
dns-server <ipv6-address>
no dns-server <ipv6-address> To configure DNS server address for DHCPv6 client.
domain-name <domain-name>
no
domain-name <domain-
name>
To configure DHCPv6 client domain name.
excluded-address <ipv6-
address>
no
excluded-address <ipv6-
address>
To exclude IPv6 address which isn't used for dynamic as-
signment in address pool.
lifetime { <valid-time> | infinity } {
<preferred-time> | infinity }
no lifetime To configure valid time or preferred time of DHCPv6 address
pool.
3. To enable DHCPv6 server function on port.
Command Explanation
Interface Configuration Mode
ipv6 dhcp server <poolname>
[preference
<value>] [rapid-
commit] [allow-hint]
no ipv6 dhcp server <poolname>
To enable DHCPv6 server function on specified port, and
binding the used DHCPv6 address pool.
229