SNR S2940-8G-v2, Configuration Manual

Page: 361 / 420

SNR S2940-8G-v2 Switch Configuration Guide
PPPoE Intermediate Agent Configuration
Switch(config)#pppoe intermediate-agent
Step 2: Configure port ethernet1/0/1 which connect server as trust port, and configure vendor
tag strip function.
Switch(config-if-ethernet1/0/1)#pppoe intermediate-agent trust
Switch(config-if-ethernet1/0/1)#pppoe intermediate-agent vendor-tag strip
Step 3: Port ethernet1/0/2 of vlan1 and port ethernet1/0/3 of vlan 1234 enable PPPoE IA
function of port.
Switch(config-if-ethernet1/0/2)#pppoe intermediate-agent
Switch(config-if-ethernet1/0/3)#pppoe intermediate-agent
Step 4: Configure pppoe intermediate-agent access-node-id as abcd.
Switch(config)#pppoe intermediate-agent type tr-101 circuit-id access-node-id abcd
Step 5: Configure pppoe intermediate-agent identifier-string as 'efgh', combo mode as spv,
delimiter of Slot ID and Port ID as '#', delimiter of Port ID and Vlan ID as '/'.
Switch(config)#pppoe intermediate-agent type tr-101 circuit-id identifier-string efgh
option spv delimiter # delimiter /
Step 6: Configure circuit-id value as bbbb on port ethernet1/0/2.
Switch(config-if-ethernet1/0/2)#pppoe intermediate-agent circuit-id bbbb
Step 7: Configure remote-id as xyz on ethernet1/0/3.
Switch(config-if-ethernet1/0/3)#pppoe intermediate-agent remote-id xyz
circuit-id value is 'bbbb', remote-id value is '0a0b0c0d0e0f' for the added vendor tag of port
ethernet1/0/2. circuit-id value is 'efgh eth 01#003/1234', remote-id value is 'xyz' for the added
vendor tag of port ethernet1/0/3.
54.4 PPPoE Intermediate Agent Troubleshooting
• Only switch enables global PPPoE intermediate agent firstly, this function can be run on port.
• Configure a trust port at least, and this port can connect to server.
• vendor tag strip function must be configured by trust port.
• Circuit-id override priority is: pppoe intermediate-agent circuit-id < pppoe intermediate-agent
identifier-string option delimiter < pppoe intermediate-agent access-node-id.
361