SNR S2940-8G-v2, Configuration Manual

Page: 372 / 420

SNR S2940-8G-v2 Switch Configuration Guide
SAVI Configuration
Command Explanation
Global Mode
savi max-dad-prepare-delay <max-dad-prepare-
delay>
no savi max-dad-prepare-delay Configure the max redetection lifetime pe-
riod for SAVI binding, no command restores
the default value.
6. Configure the global max-slaac-life for SAVI
Command Explanation
Global Mode
savi max-slaac-life <max-slaac-life>
no savi max-slaac-life Configure the lifetime period of the dynamic
slaac binding at BOUND state, no com-
mand restores the default value.
7. Configure the lifetime period for SAVI bind-protect
Command Explanation
Global Mode
savi timeout bind-protect <protect-time>
no savi timeout bind-protect Configure the bind-protect lifetime period to
a port after its state from up to down, no
command restores the default value.
8. Enable or disable SAVI prefix check function
Command Explanation
Global Mode
ipv6 cps prefix check enable
no ipv6 cps prefix check enable Enable the address prefix check for SAVI,
no command disables the function.
9. Configure IPv6 address prefix for a link
Command Explanation
Global Mode
ipv6 cps prefix <ip-address> vlan <vid>
no ipv6 cps prefix <ip-address> Configure IPv6 address prefix for a link
manually, no command deletes the config-
ured address prefix.
10. Configure the filter entry number of IPv6 address
Command Explanation
Global Mode
savi ipv6 mac-binding-limit <limit-num>
no savi ipv6 mac-binding-limit Configure the corresponding dynamic bind-
ing number for the same MAC address, no
command restores the default value. Note:
The binding number only limits the dynamic
binding, but does not limit the static binding
number.
372