SNR S2940-8G-v2, Configuration Manual

Page: 32 / 420

SNR S2940-8G-v2 Switch Configuration Guide
Basic Switch Configuration
5. Configure user
Command Explanation
Global Mode
snmp-server user <use-string> <group-
string> [ { authPriv | authNoPriv } auth {
md5 | sha } <word>] [access { <num-std> |
<name> } ] [ ipv6-access { <ipv6-num-std>
| <ipv6-name> } ] Add a user to a SNMP group. This command is
used to configure USM for SNMP v3.
no snmp-server user <user-string> [ access
{ <num-std> | <name> } ] [ ipv6-access {
<ipv6-num-std> | <ipv6-name> } ]
6. Configure group
Command Explanation
Global Mode
snmp-server group <group-string> { noau-
thnopriv | authnopriv | authpriv } [ [ read
<read-string> ] [ write <write-string> ] [ no-
tify <notify-string> ] ] [ access { <num-std> |
<name> } ] [ ipv6-access { <ipv6-num-std>
| <ipv6-name> } ] Set the group information on the switch. This
command is used to configure VACM for SNMP
v3.
no snmp-server group <group-string> {
noauthnopriv | authnopriv | authpriv } [ ac-
cess { <num-std> | <name> } ] [ ipv6-access
{ <ipv6-num-std> | <ipv6-name> } ]
7. Configure view
Command Explanation
Global Mode
snmp-server view <view-string> <oid-
string> { include | exclude }
Configure view on the switch. This command is
used for SNMP v3.
no snmp-server view <view-string> [ <oid-
string> ]
8. Configuring TRAP
Command Explanation
Global Mode
snmp-server enable traps
no snmp-server enable traps Enable the switch to send Trap message. This
command is used for SNMP v1/v2/v3.
32