SNR S2940-8G-v2, Configuration Manual

Page: 162 / 420

SNR S2940-8G-v2 Switch Configuration Guide
MAC Table Configuration
3. Configure the interval for sending MAC notification
Command Explanation
Global mode
mac-address-table notification
interval <0-86400>
no mac-address-table notifica-
tion interval
Configure the interval for sending the MAC address notifi-
cation, the no command restores the default interval.
4. Configure the size of history table
Command Explanation
Global mode
mac-address-table notification
history-size <0-500>
no mac-address-table notifica-
tion history-size
Configure the history table size, the no command restores
the default value.
5. Configure the trap type of MAC notification supported by the port
Command Explanation
Port mode
mac-notification { added | both |
removed }
no mac-notification Configure or cancel the trap type of MAC notification sup-
ported by the port.
6. Show the configuration and the data of MAC notification
Command Explanation
Admin mode
show mac-notification summary Show the configuration and the data of MAC notification.
7. Clear the statistics of MAC notification trap
Command Explanation
Admin mode
clear mac-notification statistics Clear the statistics of MAC notification trap.
24.6.3 MAC Notification Example
IP address of network management station (NMS) is 1.1.1.5, IP address of Agent is 1.1.1.9. NMS
will receive Trap message from Agent. (Note: NMS may set the authentication to the commu-
nity character string of trap, suppose the community character string as usertrap) Configuration
procedure in the following:
Switch(config)#snmp-server enable
Switch(config)#snmp-server enable traps mac-notification
Switch(config)#mac-address-table notification
162