SNR S2940-8G-v2, Configuration Manual

Page: 271 / 420

SNR S2940-8G-v2 Switch Configuration Guide
IPv6 Multicast Protocol
2. Configure MLD Snooping
Command Explanation
Global Mode
ipv6 mld snooping vlan <vlan-id>
no ipv6 mld snooping vlan <vlan-id> Enable MLD Snooping on specific VLAN. The 'no'
form of this command disables MLD Snooping on
specific VLAN.
ipv6 mld snooping vlan <vlan-id> limit {
group <g_limit> | source <s_limit> }
no ipv6 mld snooping vlan <vlan-id> limit Configure the number of the groups in which the
MLD Snooping can join, and the maximum num-
ber of sources in each group. The 'no' form of
this command restores to the default.
ipv6 mld snooping vlan <vlan-id> l2-
general-querier
no ipv6 mld snooping vlan <vlan-id> l2-
general-querier Set the VLAN level 2 general querier, which is
recommended on each segment. The 'no' form of
this command cancels the level 2 general querier
configuration.
ipv6 mld snooping vlan <vlan-id> mrouter-
port interface <interface-name>
no ipv6 mld snooping vlan <vlan-id>
mrouter-port interface <interface-name> Configure the static mrouter port in specific vlan.
The 'no' form of this command cancels the
mrouter port configuration.
ipv6 mld snooping vlan <vlan-id> mrouter-
port learnpim6
no ipv6 mld snooping vlan <vlan-id>
mrouter-port learnpim6 Enable the function that the specified VLAN
learns mrouter-port (according to pimv6 pack-
ets), the no command will disable the function.
ipv6 mld snooping vlan <vlan-id> mrpt
<value>
no ipv6 mld snooping vlan <vlan-id> mrpt Configure the keep-alive time of the mrouter port.
The 'no' form of this command restores to the de-
fault.
ipv6 mld snooping vlan <vlan-id> query-
interval <value>
no ipv6 mld snooping vlan <vlan-id> query-
interval Configure the query interval. The 'no' form of this
command restores to the default.
ipv6 mld snooping vlan <vlan-id>
immediate-leave
no ipv6 mld snooping vlan <vlan-id>
immediate-leave
Configure immediate leave multicast group func-
tion for the MLD Snooping of specific VLAN. The
'no' form of this command cancels the immediate
leave configuration.
ipv6 mld snooping vlan <vlan-id> query-
mrsp <value>
no ipv6 mld snooping vlan <vlan-id> query-
mrsp Configure the query maximum response period.
The 'no' form of this command restores to the de-
fault.
ipv6 mld snooping vlan <vlan-id> query-
robustness <value>
no ipv6 mld snooping vlan <vlan-id> query-
robustness Configure the query robustness, the 'no' form of
this command restores to the default.
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
no ipv6 mld snooping vlan <vlan-id>
suppression-query-time
Configure the suppression query time. The 'no'
form of this command restores to the default.
271