Operating Manual
OM_Axessor_CIT_V024_20170518_EN.pdf
Subject to change without prior notice
Page 79
Axessor CIT
Notes!
• Ex factory the OTM Time Delay in one time code mode is set to 99 minutes.
• You can defi ne minutes of the Delay only. Seconds cannot be defi ned.
• The maximum duration of a Delay is limited to 99 minutes.
• Entering a Courier Code opens the lock without any Time Delay.
4. In the upcoming dialogue select „
YES
“ using the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
6.4.3.10 Configuring the opening delay of OTM Duress Alarm -
Submenu DURESS cit
Once a OTM duress code is entered, the lock opens after the OTM Duress
Alarm opening delay time has elapsed.
Authorization:
Master Code
1. Select the submenu „
DURESS cit
“.
2. Press
the
<ENTER>
key. The currently set duress opening time delay is
displayed (hours:minutes).
3. Use
the
<LEFT>
or
<RIGHT>
key to set the desired duress opening time
delay (setting range „00:00“ to „99:00“).
Note!
• Ex factory the Duress Time Delay in one time code mode is set to
99 minutes.
• You can defi ne minutes of the Delay only. Seconds cannot be defi ned.
• The maximum duration of a Delay is limited to 99 minutes.
• Entering a Courier Code opens the lock without any Time Delay.
4. In the upcoming dialogue select „
YES
“ using the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
Summary of Contents for Axessor CIT
Page 1: ......