OM_Axessor_CIT_V024_20170518_EN.pdf Operating
Manual
Page 18
Subject to change without prior notice
Axessor CIT
3.5 System
components
Depending on the size of the system, the number of locks and the number
of operators using the management software, different components are
required. Beside the lock itself, the programming software and the activa-
tion software will always be required. For the operation in interactive
mode (ICS, OTC or Dual mode) additionally a dispatcher software AS274
and an APHI (Application Programming Hardware Interface) is required.
3.5.1
Axessor CIT lock
Axessor CIT consists of a motorized lock with standard dimensions and
an input unit with green navigation buttons. The lock is shipped from the
factory in standard mode with master code
00123456
, and functions as a
conventional safe lock.
3.5.2
AS280-INSW activation software
The AS280-INSW activation software for Windows® operating systems is
used to switch from standard mode to interactive mode (ICS, OTC or Dual
mode) and mixed mode. Additionally the AS280-INSW Software is used
for network installation.
3.5.3
AS284-USBW or AS284-NETW programming software
Basic settings for the lock, such as the language, time delays for open-
ing, inputs and outputs, etc., can be configured with the AS284-USBW or
AS284-NETW programming software for Windows® .
3.5.4
AS274 server management software
This practical software makes it possible for a large number of users to
work with the Axessor CIT at the same time. Even the most sophisticated
systems can be managed with this software.
3.5.5
APHI (Application Programming Hardware Interface)
The APHI external interface was developed for the integration of lock
management with a customer’s existing software solution. Once it has
been integrated with existing software, APHI handles all tasks related to
the issuance of one-time combinations.
Summary of Contents for Axessor CIT
Page 1: ......
