Smartlock Digital Axessor CIT, Operating Manual

Page: 10 / 114

Operating Manual OM_Axessor_CIT_V024_20170518_EN.pdf
Subject to change without prior notice Page 11
Axessor CIT
1.2.5 Symbols used in this operating manual
The following symbols are used in this operating manual to direct your
attention on particular situation, e.g. to indicate a hazardous situation,
requirements which must be met, etc.:
Warning!
Indicates a hazard which can cause damage to the unit or have a serious
effect on the function or use of the unit if unobserved.
Important!
Indicates important information which must be observed during the de-
scribed procedure.
Note!
Indicates notes, information or pointers, which facilitate work or provide
additional background information or point out specific details.
Requirement!
Indicates requirements that must be met for the execution, activation,
modification or deletion of the described function. These requirements
must be met before proceeding.
AS284-USBW or AS284-NETW Programming Software
Refers to the AS284-USBW or AS284-NETW Programming Software (op-
tionally available), which allows additional settings and functions.
1.2.6 Text marking
• The character „

“ stands for „see“, „refer to“ or „also consult“
Sample: for a description of Access Code Hierarchy (

Code hierarchy
and code formats on page 43
).
• Text appearing on the display is marked in capitals and set into quota-
tion marks (sample: „LOCKED“).
• Keys to be used are marked in bold capitals and set into angle brackets:
<DEL> = Delete key
<NUMERIC> = Numeric keys 0…9
<INFO/ESC> = Information/Escape key
<ENTER> = Enter key
<MODE> = Mode key
<LEFT> = Left arrow key
<RIGHT> = Right arrow key