OM_Axessor_CIT_V024_20170518_EN.pdf Operating
Manual
Page 12
Subject to change without prior notice
Axessor CIT
2
Safety and Environment
2.1 General
Every person working with the Axessor CIT must have read and under-
stood the operating manual before carrying out any work.
Knowing and understanding the contents of the operating manual is a
basic requirement for protecting the personnel against any kind of danger,
to prevent faulty operation, and to operate the unit safely and correctly.
2.2
Qualification of personnel
All actions described in the present operating manual (installation, com-
missioning, operation, etc.) must be carried out only by well trained and
sufficiently qualified personnel.
For safety and warranty reasons any action beyond the scope of this
manual must be carried out only by qualified personnel authorised by the
manufacturer.
It is assumed that all persons working with the Axessor CIT are familiar
and comply with the appropriate regulations on work safety and the pre-
vention of accidents.
2.3
Prohibited modifications to the unit
Modifications on the Axessor CIT electronic safe lock are explicitly not
recommended, it may void warranty and impair the security and safety of
the unit.
For the replacement of defective components use exclusively original ac-
cessories and spare parts available from your supplier.
2.4 Environment
Packing and consumable material (e.g. batteries) must be disposed of
and/or recycled according to the local regulations.
At the end of the service life the unit and its components must be returned
to the manufacturer or to a collecting point for disposal or recycling ac-
cording to the local regulations.
In case of doubt please contact your supplier.
Summary of Contents for Axessor CIT
Page 1: ......
