OM_Axessor_CIT_V024_20170518_EN.pdf Operating
Manual
Page 78
Subject to change without prior notice
Axessor CIT
6.4.3.8 Configuring the Window to enter a one time code - Sub-
menu PROCTIM cit
This defines the time window in One Time Mode ICS or OTM to enter the
opening combination after an identification (
Opening procedure in ICS
mode on page 51 or Opening procedure in OTC mode on page 52
).
Authorization:
Master Code
1. Select the submenu „
DUAL bank
“.
2. Press
the
<ENTER>
key. The currently set window is displayed
(minutes:seconds).
3. Use
the
<LEFT>
or
<RIGHT>
key to set the desired window (setting
range „00:00“ to „99:00“).
Note!
• Upon delivery the window is set to 2:30 minutes.
4. In the upcoming dialogue select „
YES
“ using the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
6.4.3.9 Setting OTM Time Delay - Submenus DELAY cit
Once a valid OTM code is entered, the lock only opens after the configured
time delay has elapsed. A time delay can be set between 0 (deactivated,
no Time Delay) and 99 minutes.
Authorization: Master Code or Manager Code
1. Select the submenu „
DELAY cit
“.
2. Press
the
<ENTER>
key. The currently set Time Delay is displayed.
3. Use
the
<LEFT>
or
<RIGHT>
key to set the desired Time Delay (setting
range „00:00“ (deactivated, no Time Delay) to „99:00“ minutes).
Summary of Contents for Axessor CIT
Page 1: ......
