Operating Manual
OM_Axessor_CIT_V024_20170518_EN.pdf
Subject to change without prior notice
Page 31
Axessor CIT
4.8 External connections at the eBox
The eBox provides 5 additional inputs and outputs, two bus sockets and a
RJ45 socket. Refer to the table and the wiring example below to connect
the input and output signals as well as the eBox and the network cable.
The eBox functions are available only if it is connected to an Axessor CIT
lock, and if the eBox is connected to a power supply. In case of power fail-
ure, the batteries in the input unit will backup the lock functions, but not
the eBox functions.
Terminal
Description
Capacity / Remarks
2
4 6
8 10
12
16
14
18
20
1
3 5
7
9 11
15
13
17
19
OUT
3B
OUT
4B
OUT
5B
OUT
6B
OUT
7B
IN 3
IN 5 IN 7
Power supply GND
OUT
3A
OUT
4A
OUT
5A
OUT
6A
OUT
7A
IN 4
IN 6
GND
GND
GND
7 mm
Note: the function of the Inputs and Outputs can be
assigned with the optional AS284-USBW or AS284-NETW Programming
Software.
18 / 20
Power supply
9 VDC ... 26 VDC / 700 ... 200 mA
1 / 2
Output 3
standard: not assigned
Contact voltage:
24 VAC
Cont. Output Load current:
0.4 A at 25°C
0.3 A at 50 °C
Internal Output impedance:
max. 2 Ohms
Relay with potential-free working
contacts (NO - normally open).
3 / 4
Output 4
standard: not assigned
5 / 6
Output 5
standard: not assigned
7 / 8
Output 6
standard: not assigned
9 / 10
Output 7
fix set for „external power“
Summary of Contents for Axessor CIT
Page 1: ......