40 5/16" (1024mm) is
Note:
To avoid splintering wood
doors, drill holes (A) and (C)
from both sides of the door.
D
A. Drill 2 1/8" (54mm) dia. hole thru
the door.
B. Drill 1" (25mm) dia. hole
in edge of door.
C. Drill two (2) 5/16" (8mm) dia.
Holes thru door.
D. Drill pilot holes for latch
screws. 7/64" (2.5mm) dia.
Cut notches as
shown on template. See note.
(Except Dummy Trim)
Mortise
for latch front 1 1/8" (29mm)
wide X 2 1/4" (57mm) high X 5/32"
(4mm) deep. (Except Dummy Trim)
See note.
(Except Dummy Trim)
4. Unpack Lock.
A.
Remove the lock components from the
box.
Outside Assembly
(stays assembled)
Inside Rose Support
Assembly
Rose Scalp
Inside
Lever
Handle
Through Bolts
* Chisel & hammer
* #2 phillips screw driver
* Handle removal tool (supplied)
* 3/8” or I/2” drill
Tools Required
*2 1/8" (54mm) hole saw
*1" (26mm) boring bit
*5/16" (8mm) drill bit
*7/64" (2.5mm) drill bit
YMCL100
YMCL100 Series
Instructions
Cylindrical Lockset
Installation
An ASSA ABLOY Group brand
P/N 80-9150-0075 Rev C
YMCL107 Function Shown
™
