3
An ASSA ABLOY Group brand
P/N 80-9150-0075 Rev C
Note:
Cylinder and Sleeve must be properly
installed or the security of the lock will be
compromised.
A. Insert key and rotate 45° counterclockwise.
B. Depress Retainer with tool provided.
Finish Care
This lockset is designed to provide the highest standard of product quality and performance.
Care should be taken to insure a long-lasting finish. When cleaning is required use a soft,
damp cloth. Using lacquer thinners, caustic soaps, abrasive cleaners or polishes could
damage the coating and result in tarnishing.
To Replace Or Install Cylinder:
A. Remove the sleeve from inside the shank or
from the old cylinder.
B. Slide cylinder into sleeve.
C. Rotate key 45 counterclockwise. Depress
retainer plate, push the handle onto the
shank until fully seated. Pull on handle to
insure properly seated.
C. Slide Lever off lock.
YMCL100 Grade1
Key-In-Lever
Cylindrical Lockset
