HGM93XX MPU(CAN) SERIES GENSET CONTROLLER
HGM93XX MPU(CAN) Series Genset Controller Version: 1.1 2016-11-03 Page 17 of 77
5.3 LCD DISPLAY
5.3.1 MAIN DISPLAY
Main screen show pages; use
to scroll the pages and
to scroll the screen.
Main screen
, including as below:
Gen: voltage, frequency, current, active power, reactive power;
Mains: voltage, frequency;
Engine: speed, temperature, oil pressure, battery voltage;
Other some status
Status,
including as below,
Status of genset, mains, and ATS
NOTE: HGM9310MPU
，
HGM9310CAN has no mains status screen.
Engine,
including as below,
Speed, engine temperature, engine oil pressure, fuel level, auxiliary analog 1, auxiliary
analog 2, battery voltage, charger voltage, accumulated run time, accumulated start times,
user’s total run time A, user’s total run time B.
NOTE:
If connected with J1939 engine via CANBUS port, this page also includes:
coolant pressure, coolant level, fuel temperature, fuel pressure, inlet temperature, exhaust
temperature, turbo pressure, fuel consumption, total fuel consumption and so on. (Different
engine with different parameters)
Gen,
including as below,
Phase voltage, line voltage, frequency, phase sequence
Load,
including as below,
Current, active power(positive and negative), total active power (positive and negative),
reactive power(positive and negative), total reactive power (positive and negative), apparent
power, total apparent power, power factor(positive and negative), average power factor
(positive and negative), accumulated energy, earth current, total electric energy A and B.
NOTE:
Power factor shows as following,
Remark:
P stands for active power
Q stands for inactive power
