HGM93XX MPU(CAN) SERIES GENSET CONTROLLER
HGM93XX MPU(CAN) Series Genset Controller Version: 1.1 2016-11-03 Page 19 of 77
5.3.2 USER MENU AND PARAMETERS SETTING MENU
Press and hold
for more than 3 seconds to enter into user menu;
Parameter
1. After entering the correct password (factory default password is 00318) you can enter
parameter settings screen.
2. After entering the correct password (factory default password is 09300) you can enter
basic parameter settings screen which can meet the demands of most users as the
basic parameters can be set in sequence.
Language
Selectable Chinese, English and others (default: Espanol)
Commissioning
On load, off load or custom commissioning can be chosen. Custom commissioning can
configure on load or not during commissioning, when to commissioning and select the
mode after commissioning (manual mode, auto mode and stop mode).
Clear users’ accumulation
Can clear total run time A and B, total electric energy A and B.
Parameter setting Including as following,
Mains settings
Timer settings
Engine settings
Generator settings
Load settings
Switch settings
Temperature sensor settings
Oil pressure sensor settings
Level sensor settings
Flexible sensor 1
Flexible sensor 2
Input port settings
Output port settings
Module settings
Scheduling and maintenance settings
GSM settings
