EN
7. Setup and fieldbus configuration on MQL system
- 92 -
951-170-218-EN
Version 06
PROFIBUS fieldbus coupler and
termination resistor, Fig. 51
Legend to Fig. 51
1 M12x1 connection to MQL system
2 M12x1 connection for
termination resistor
3 M12x1 PROFIBUS connection
4 Fastening screw
5 Termination resistor
7.1.2.2 Syst
ems with PROFINET
The MQL system designs
UFD10-1-2XX000 have a gateway that al-
lows for integration of the MQL systems into
a PROFINET environment.
The gateway is factory-configured so that
no further settings are required.
The bus
address in the MQL already set to 02 and
cannot be changed.
No settings need to be made on the gate-
way.DIP switch 7 in the MQL control unit
must be set to the ON position (factory
setting).
7.1.3 Factory settings
Table 9 below shows the basic settings of
the DigitalSuper systems on delivery.
1
2
4
3
5
2
1
3
H1
H3
H4
H2
4
5
