Simrad WBT Mini Instruction Manual Download Page 59 | Manualshive

Page: 59 / 68

background image

425197/B

57

List of spare parts

Topics

USB flash drive (Spare part), page 57

O-ring 82.27 x 1.78 mm (Spare part), page 58

Ethernet and DC power cable (Spare part), page 58

Transducer connector MCIL4M (Spare part), page 59

Transducer connector MCIL8M (Spare part), page 59

Serial line interface cable (Spare part), page 60

Extension cable (Spare part), page 61

USB flash drive (Spare part)

You can only use the USB flash drive provided by Kongsberg Maritime with the WBT Mini.
The USB flash drive provided is exclusively selected, tested and formatted for use with the
WBT Mini. The use of another USB flash drive - even if it is identical to the device provided
- may reduce the operational quality and the performance of the system.

•

Part name:

USB flash drive

•

Part number:

429105

•

Number in use:

1

•

Recommended number in spare:

1

(

The USB flash drive shown in the photo was the type used at the time of

writing. As a commercial item, the make and model can be replaced without
prior notice.

)

The USB flash drive provided for data storage is formatted with Linux
EXT2. To read the USB flash drive on your PC, a dedicated driver must
be installed. The "ext2fsd" driver required to read the USB flash drive is
provided with the WBT Mini. You must install the driver for the USB flash
drive before you insert the USB flash drive.

Do not attempt to communicate with the USB flash drive until the "ext2fsd" driver has
been installed on the PC. This may cause inadvertent formatting of the USB flash drive as
a Windows device. Formatted as a Windows device, the USB flash drive cannot be used
in the WBT Mini.

Spare parts and consumables

«
...
57
58
59
60
61
...
»

Summary of Contents for WBT Mini





































































Reviews:

No comments

Related manuals for WBT Mini

Brand: Arteche Pages: 9

DuoPak APD 2015

Brand: Absolute Process Instruments Pages: 2

Brand: Cambridge Audio Pages: 30

Brand: Cambridge Audio Pages: 9

Brand: Cambridge Audio Pages: 51

Brand: Cambridge Audio Pages: 55

Brand: Vemco Pages: 2

Brand: Vemco Pages: 2

Brand: HBK Pages: 40

Brand: HBK Pages: 104

EchoStream EN1215EOL

Brand: Inovonics Pages: 2

Brand: Yaesu Pages: 80

Brand: Tactic Pages: 2

Brand: Vaisala Pages: 4

Brand: Denon Pages: 95

Brand: Black Widow Security Pages: 2

Brand: Integra Pages: 112

Brand: Camille Bauer Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands