Simrad WBT Mini, Instruction Manual

Page: 19 / 68

425197/B
17
Note
Just making changes and selecting
OK
at the bottom of the page will not install anything.
Select what to install, define the relevant parameters, and then select
Add
.
The transducer installation dialog box is made for fixed installation on large vessels. Not
all of the parameters are relevant for smaller vessels and portable application. Refer to the
online help for more information on parameters not mentioned here.
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens. This dialog box contains a number of
pages that you select from the menu on the left side.
3 On the left side of the
Installation
dialog box, select
Transducer Installation
.
4 Select the transducer you wish to install from the
Model
list.
Note
Make sure that you select a transducer that is supported by your current license.
5 Insert the serial number.
This serial number is very important, because you will need it as a reference
identification when the WBT Mini is calibrated. Some new Simrad transducers with
built-in "intelligence" will automatically provide this serial number.
6 Type the name you wish to use into the
Custom Name
box.
Type any name that you wish to use to identify the transducer. The name you select
will only be used to identify the transducer in other dialog boxes. It is not used in the
echo data that you export. If you do not have a computer keyboard connected to your
WBT Mini system, select the
Keyboard
button to open an on-screen keyboard.
7 Select mounting method.
8 Specify the orientation of the transducer beam.
9 If relevant for your transducer installation, provide the accurate physical location of the
transducer with reference to the vessel’s coordinate system.
Use the centre of the transducer face as reference, and define the offset values related
to the
Ship Origo .
Using the WBT Mini in EK80 mode