Simrad WBT Mini, Instruction Manual

Page: 20 / 68

18
425197/B
a Select the offset value in the X-axis (fore-and-aft direction) from the Ship Origin .
Adjust with a positive value for X if the transducer is located ahead of the ship
origin.
b Select the offset value in the Y-axis (athwartship) from the Ship Origin . Adjust
with a positive value for Y if the transducer is located on the starboard side
of the ship origin.
c Select the offset value in the Z-axis (vertical) from the Ship Origin . Adjust with a
positive value for Z if the transducer is located under the ship origin.
10 Select
Add
to save the information you have provided.
The transducer is added to the list in the
Installed Transducers
box.
11 Repeat for each transducer that you wish to install.
12 Continue your work in the
Installation
dialog box, or select
OK
to close it.
Result
Once a transducer has been installed, it is listed in the
Installed Transducers
box. To see the
information you have collected about the transducer, select the relevant transducer in the list.
The
Edit
functionality on the
Transducer Installation
page makes it possible to change
the information you have provided for the transducer. You cannot change the model
identification and the serial number. The custom name is used several places in the user
interface, and it can be changed.
The
Remove
functionality on the
Transducer Installation
page makes it possible to delete the
information you have provided for the transducer. There is no "undo" functionality.
Related topics
Using the WBT Mini in EK80 mode, page 12
Installing transceiver channels, page 19
Simrad WBT Mini Instruction Manual