42
425197/B
List of WBT Mini cables
A set of cables is required to connect the system units and to the relevant power supply. The
commercial cables used by each PC are not included.
Cable
Type
From/To
Minimum requirements
Ethernet and DC
power cable
From WBT Mini to PC and DC
power outlet
C1A
C1B
In
EK80
mode, the WBT Mini is connected to the PC with a dual-purpose connector
for Ethernet and DC power. Make sure that your power supply meets the WBT Mini
requirements. The voltage must not drop below +12 VDC.
Serial cable
From PC to WBT Mini
C2
In
Autonomous
mode, the WBT Mini is connected to the PC with a serial cable. The serial
cable is used to download the mission plan.
DC power cable
From Power Supply to WBT Mini
2 x 0.75 mm²
C3
For power connection in
Autonomous
mode, you use the dual-purpose cable (Ethernet and DC
power), or you can make a dedicated power cable. Make sure that your power supply meets
the WBT Mini requirements. The voltage must not drop below +12 VDC.
Transducer cable
From WBT Mini to transducer
C4
The transducer cable is provided with the transducer. If you need to splice the transducer
cable to make it longer, observe the information in the end-user documentation for the
relevant transducer.
Related topics
Cable layout and interconnections, page 39
Cable plan, page 40
Connectors, page 43
Cable drawings and specifications, page 49
Simrad WBT Mini Instruction Manual
Summary of Contents for WBT Mini
Page 2: ......
Page 66: ... 2018 Kongsberg Maritime ...
Page 67: ......
Page 68: ...Simrad WBT Mini Miniature wideband echo sounder transceiver Instruction Manual ...
