Simrad WBT Mini, Instruction Manual

Page: 34 / 68

32
425197/B
Note
You can only use the USB flash drive provided by Kongsberg Maritime with the WBT Mini.
The USB flash drive provided is exclusively selected, tested and formatted for use with
the WBT Mini.
The use of another USB flash drive - even if it is identical to the device provided - may
reduce the operational quality and the performance of the system.
Related topics
Using the WBT Mini in Autonomous mode, page 23
Waking up the WBT Mini from Sleep state
If you do not intend to use your battery-powered WBT Mini for a while, you can set it
to
Sleep state to save power. The WBT Mini will remain in Sleep state until you send a
wake-up command, or you reconnect to it.
Prerequisites
The serial line interface cable is connected between the PC and the WBT Mini.
Context
While in Sleep state, the WBT Mini will not collect any data. If you have downloaded a
mission plan, it will be kept in the memory, but it will not be executed.
To run a mission plan, the WBT Mini must be activated. When a mission plan is active,
the WBT Mini will sleep between the active parts of the mission. In
Autonomous mode,
the WBT Mini is set up to enter Sleep state between each data collection sequence. This is
done to save battery power.
The following methods can be used to "wake up" the WBT Mini:
A Connect to the WBT Mini.
B Select the
Wake
button.
Procedure
1 If the WBT Mini is not connected:
a Start the EK Mission Planner program.
b Connect to the WBT Mini.
1 Select the
Transceiver
tab to open the
Transceiver
page.
Simrad WBT Mini Instruction Manual