22
425197/B
Procedure
1
Open the
Setup
menu.
2
On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens. This dialog box contains a number of
pages that you select from the menu on the left side.
3
On the left side of the
Installation
dialog box, select
Transceiver
.
4
Disconnect the requested frequency channels(s).
a
Observe that the transceiver(s) you have connected to the PC are listed.
Each transceiver is identified with type and serial number. The available channels
on each transceiver are listed separately.
b
Write down which transducers you are using on each channel.
c
For each channel you want to disconnect, set transducer to
None
.
d
Observe that the status of the relevant frequency channels changes to
Available
.
5
At the bottom of the page, select
Apply
to save your settings.
6
Continue your work in the
Installation
dialog box, or select
OK
to close it.
Result
You cannot use the disconnected channels. If you want to use them again, each must
be reinstalled.
Related topics
Using the WBT Mini in EK80 mode, page 12
Simrad WBT Mini Instruction Manual
Summary of Contents for WBT Mini
Page 2: ......
Page 66: ... 2018 Kongsberg Maritime ...
Page 67: ......
Page 68: ...Simrad WBT Mini Miniature wideband echo sounder transceiver Instruction Manual ...
