Simrad WBT Mini, Instruction Manual

Page: 31 / 68

425197/B
29
Inserting the USB flash drive in the WBT Mini
The USB flash drive is inserted and extracted through a dedicated access panel on the WBT
Mini.
Prerequisites
Whenever you need to open a WBT Mini for parts replacement or other kind of maintenance,
you must do this in a protected environment. Make sure that you have enough working
space and the correct tools.
The following special tool is required for this task:
• Torx screwdriver (T10)
The following spare parts and/or consumables may be required for these tasks:
• USB flash drive
• O-ring 82.27 x 1.78 mm
• Silicone grease: Parker Super-O-Lube
Context
The USB flash drive containing the recorded data is located in a dedicated compartment.
An access panel is used to close the compartment and prevent moisture ingression. The
access panel is fitted with an O-ring. To open and close the access panel, you need a torx
screwdriver with a T10 head.
Note
Do not open and close the access panel unless you also tighten it properly.
Using the WBT Mini in Autonomous mode