SimonsVoss SI:SmartHandle Series, Manual, Page: 90 / 160


No water or moisture must penetrate the door or reach the inner side. In
case of moisture, always use the WP version.

Programme the SI:SmartHandle before installation!

The SI:SmartHandle may be difficult to fit in mortise locks with a
retaining nut. You must not alter the retaining nut in any way, using a file,
for example; otherwise, the handle's guide piece will no longer fit
accurately.

When installing SmartHandle, you must ensure that the cable does not
get caught or fitted too tightly to the door.

Conventional fastening system, including MO: When fitting the handle
into position on the door with the two screws, make sure that the
electronics are not subject to mechanical load and are not damaged in
any other way.

For MO: The mechanical cylinder is not included in the supplied package
for the SI:SmartHandle with MO.

Always install a locking cylinder. If necessary, use a blank cylinder.
8.8.4 Conventional fastening system, including Swiss Round MO:
Keys:
1. Inlay
2. Inlay
3. Outer handle, including lock ring
SmartHandle SmartIntego (Manual)
8. Installation (manual)
90 / 160