SimonsVoss SI:SmartHandle Series, Manual

Page: 13 / 160

4 Intended use
Products in the SI:SmartHandle range consist of electronic door fittings.
Users can engage SI:SmartHandle and open the door onto which it is fitted
with an authorised ID medium, such as a transponder.
The corresponding authorisations need to be issued using an electronic
locking plan.
NOTE
The SI:SmartHandle must be programmed before it is fitted to the door!
Products in the SI:SmartHandle range may only be used for locking and
unlocking doors. No other use is permitted.
SmartIntego is an independent product group from SimonsVoss. The
SmartIntego components can be set up using the SimonsVoss
configuration software and connected to an integrator system via the
SmartIntego interface. The integrator is usually a manufacturer of building
management software (access control software, EMEA solution, fire alarm
system, etc.), in which the SimonsVoss SmartIntego locking devices are
also managed. It develops the interface to his system independently and is
also responsible for the connected functions. The SmartIntego interface is
available in two versions:

SmartIntego WirelessOnline (WO)

SmartIntego Virtual Card Network (SVCN)
Integrator
Integrator system
Integrator
- Access control software
- Intrusion detection system
- Fire alarm system
- ...
establishes includes functions
Connected
SmartHandle SmartIntego (Manual)
4. Intended use
13 / 160