SimonsVoss SI:SmartHandle Series, Manual

Page: 10 / 160

Loss of the precise guidance of the handle
It may be difficult to install on mortise locks with a retaining nut.

Do not mechanically alter the locking nut. The handle would then lose its precise guidance.
Freeze mode due to separate storage
If you store the housing halves separately for a longer period of time (more than a week), Smart-
Handle may switch to freeze mode.

Only separate the two halves of SmartHandle when installing it.
Mechanical damage to the LockNode
If the cover is fitted or removed, the LockNode can be damaged.
1. Fit or remove the cover carefully.
2. In removal, be aware of the slit in the cover.
Mechanical damage to the SmartHandle due to obstructions
If the handle can hit the wall or other objects due to the installation location, it can become de-
formed or break off.

In such situations, use a suitable door-stopper.
Mechanical damage to the handle through misuse as door-opener
Some doors are very heavy and solidly constructed. The handle is not suitable for opening such
doors.

Make suitable door openers available (suitable handles) to avoid misuse of the knob.
NOTE
Qualifications required
The installation and commissioning requires specialized knowledge.

Only trained personnel may install and commission the product.
Damage from unsuitable tool
Only use the SimonsVossfitting tool for assembly and battery changes.
Faulty orientation before fitting the conventional MO-version
The fastening holes and the spindle must be vertically aligned; otherwise, you may not be able to
install the fitting. Use the drill-hole template.
Effect of theSI:SmartHandle
The SI:SmartHandle affects only the latch of the mortice lock.
Programming with obsolete LSM version
New components can only be programmed with the current version of LSM.
SmartHandle SmartIntego (Manual)
2. Product specific safety notices
10 / 160