SimonsVoss SI:SmartHandle Series, Manual

Page: 110 / 160


When installing SmartHandle, you must ensure that the cable does not
get caught or fitted too tightly to the door.

Conventional fastening system, including MO: When fitting the handle
into position on the door with the two screws, make sure that the
electronics are not subject to mechanical load and are not damaged in
any other way.

For MO: The mechanical cylinder is not included in the supplied package
for the SI:SmartHandle with MO.

Always install a locking cylinder. If necessary, use a blank cylinder.
8.11.4 Installation
8.11.4.1 Step 0: Preparing drill holes
1. Align the drilling template exactly (the punching of the square coincides
with the nut opening of the door lock and the template is aligned abso-
lutely parallel to the door edge. The dimension lines serve as a refer-
ence).
2. Punch the top and bottom holes in the door with a pointed object (pin).
SmartHandle SmartIntego (Manual)
8. Installation (manual)
110 / 160