SimonsVoss SI:SmartHandle Series, Manual

Page: 69 / 160

37. Push the cover (2) onto the outer fitting (2), so that it is flush with the
door. The cover is not symmetrical; look carefully at the marking to en-
sure correct positioning (Diagram 7).
38.Click the inlay (1) carefully into the cover (2).
8.4.6 Diagrams for conventional fastening system
Figure 2:
Handle fastener piece
Figure 3:
Handle fastener piece open
Figure 4:
Handle fastener piece closed
Figure 5:
Fastener piece - correct position for
the handle fastener piece when
closed
Figure 6: Figure 7:
Tab. 3:
Diagrams showing installation
SmartHandle SmartIntego (Manual)
8. Installation (manual)
69 / 160