SimonsVoss SI:SmartHandle Series, Manual, Page: 79 / 160


No water or moisture must penetrate the door or reach the inner side.
Always use the WP version for moisture.

Programme SI:SmartHandle before installing.

SI:SmartHandle may be difficult to fit in mortise locks with a retaining
nut. You must not alter the retaining nut in any way, using a file, for
example; otherwise, the handle's guide piece will no longer fit
accurately.

When installing SmartHandle, you must ensure that the cable does not
get caught or fitted too tightly to the door.

Conventional fastening system: When fitting the handle into position on
the door with the two screws, make sure that the electronics are not
subject to mechanical load and are not damaged in any other way.
8.6.4 Installation conventional fastening door monitoring
These installation instructions are designed for a standard door with a self-
locking panic lock (SLP lock) already fitted. Old fittings must be fully
removed before SI:SmartHandle SmartHandle is installed.
NOTE
To ensure full functionality, SmartHandle must always be used in combin-
ation with a self-locking panic lock (SLP lock). Please observe conformity
declarations of lock manufacturers in accordance with EN 179!
All steps must be completed in order after one another to ensure correct
installation.
SmartHandle SmartIntego (Manual)
8. Installation (manual)
79 / 160