Silca UC 199, Operating Manual

Page: 31 / 107

5 OPERATING GUIDE
INTRODUCTION
The Operating Guide below gives instructions on how to use the UC199 automatic key-cutting machine.
All operations are described to facilitate use of the machine.
To facilitate describing the operations we have summarised the two “possible” machine configurations as follows:
UC199 WITH STANDARD CONFIGURATION:
•
Cutting side standard clamp (L100)
•
Standard optic reader clamp (L100)
Fig. 39
UC199 WITH LOADER UNIT CONFIGURATION (OPTIONAL):
•
Key blank loader
•
Cutting side automatic clamp (L1)
•
Standard optic reader clamp (L100)
Fig. 40
Operating Manual
UC199
Copyright Silca 2012
27