Silca UC 199, Operating Manual

Page: 39 / 107

5.5 [2] COPY WITH CORRECTION
- CONFIGURATION WITH OPTIONAL LOADER UNIT
Function used to correct (on the copy) any imperfections in the depth and/or cutting pitch on the original key
(generally used for very worn keys).
1- Copy from original
2- Copy with adjust.
3- Queue from PC
4- Calibrations >>
5- Maintenance
6- Options
1) with the pointer on position 2, press ENTER to select the function.
Operational keys: use the arrow keys [Up/Down] to move the cursor to the option required and press ENTER.
Original on right
Adaptor:
[START]
2) place the original key into the R/h clamp (remember to lower the gauge).
3) place the key blank (or blanks) into the loader, with their backs towards the operator.
Press START to see on the display, at first:
Reading in progress …
ATTENTION: The key depth is not fully cut during reading.
and then:
Feeder ready
Depth adj. = +00
Spaces adj. = +00
Pcs: 1 / 1 [START]
4) Make the necessary adjustments to copy the key as required.
•
Data alteration
The operator may alter the ‘depth’ and ‘space’ parameters.
Operational keys: to increase or decrease the parameters use a combination of the keys SHIFT + [arrow Up]
or SHIFT + [arrow Down].
Depths: (from -20 to +20 hundredths of a mm)
Enter the value (positive or negative) to move all the cuts closer to or farther from the key stop.
Fig. 46 – DEPTH ADJUSTMENTS
Operating Manual
UC199
Copyright Silca 2012
35