manualshive.com logo in svg

Sifos Technologies PowerSync PSA100, Technical Reference Manual, Page: 98 / 147

Share
Download
Sifos Technologies PowerSync PSA100 Technical Reference Manual Download Page 98

PowerSync Analyzer Reference Manual 

March 9, 2010 

                                   Sifos Technologies page 

 

98

parameters and limit processing details.   Finally, the 

Interop

 tap uses all of the test results to create a 

Sifos Interop 

Index

  or score based upon test limit excursions of various tests on various ports.  The score is based upon weighted 

values for the various PSE Conformance parameters. 
 
Occasionally, a test malfunction such as might be caused by a PSE port failing to power-up or powering down 
unexpectedly will result in an aborted test and a 

See Log!

 indicator in the parameter result field.   This means that an 

error log has formed in the current active results directory.  That log file can be opened simply by clicking on the Error 
Log 

hyperlink

 in the upper right hand corner of the PSE Conformance Test report. 

 
The file 

psa_report.xls

 is always installed as a read only file and any specific reports generated following a test 

sequence should ALWAYS be saved to another name. 
 
Special versions of 

psa_report.xls

 may be created and utilized for purposes of adjusting test limits or adding statistics 

that go beyond the standard template report.   These versions can be associated with a PSE Local Configuration File 
(

see Section 2.4.4

) such that when that PSE file is loaded to PSA Interactive or PowerShell, the custom-modified report 

template will be used in place of the standard 

psa_report.xls

 template for that particular PSE type. 

 
To create a modified template, the following steps should be taken: 
 

1. Copy 

 

…\PSA1200\Results\psa_report.xls

 to a newly named template such as 

…\PSA1200\Results\ 

my_psa_report.xls

 

(saved into that same directory path). 

2.  Remove Read-Only permissions from 

…\PSA1200\Results\ 

my_psa_report.xls

 

3. Edit

 

…\PSA1200\Results\ 

my_psa_report.xls 

as required and save it. 

4.  Restore Read-Only permissions to 

…\PSA1200\Results\ 

my_psa_report.xls

 

5.  Open (or create) PSE Local Config File (e.g. 

my_PSE.txt

) in the  

…\PSA1200\Config\ directory

. 

6.  Add the following line to 

…\PSA1200\Config\

 my_PSE.txt 

: 

 
       

PSE_Conf_Test_Report:  my_psa_report.xls 

 

Loading the PSE Config File 

my_PSE

 will now cause the PSE Conformance Test Sequencer to utilize this modified 

template file in place of the standard 

psa_report.xls

.   Sections 3.1.1 and 4.5 provide further information on loading 

PSE local configuration files.    
 

NOTE!

  Never make modifications to 

psa_report.xls

. 

 

5.11.  Enabling the PSE Conformance Test Suite  

 

The 

standard

 PSA1200, PSA100, and PSA2400 PowerSync Analyzers do not enable the PSE Conformance Test Suite.   

Attempts to execute any of the PSE Conformance Tests either directly or via the sequencer will yield “Invalid 
Command” responses to PowerShell.    PSE Conformance Test Menus for 

PSE Tests

 and Conformance 

Sequencer

 will 

be disabled in PSA Interactive when connected to a PSA chassis that does not have this support.  
 
PowerSync Analyzer customers may elect to upgrade their analyzer to support the PSE Conformance Test Suite.  This 
is done simply by procuring a unique key code from Sifos Technologies.  Contact Sifos Technologies for further 
information on performing this upgrade to your PowerSync Analyzer. 

 

Summary of Contents for PowerSync PSA100




















































































































































Reviews:

No comments