Deactivation of verification mode
Verification mode is deactivated in one of the following ways:
● Pressing verification button again.
● Writing integer ‘0’ to parameter 320 (Calibration mode).
Verification mode automatically stops if not manually deactivated within 4 hours.
8.7
User and verification sealings
MAG 8000 CT must be sealed to remain custody transfer-approved.
Adequate sealing of sensor electronics
Compact version
Figure 8-2
MAG 8000 CT user sealings (A)
Figure 8-3
MAG 8000 CT verification sealing (A)
Service and maintenance
8.7 User and verification sealings
SITRANS MAG 8000
Operating Instructions, 11/2018, A5E03071515-AE
81