SITRANS F M MAG 8000 CT
0200
M17
Siemens AG, DE-76181 Karlsruhe
Made in France
2UGHU1R
6HULDO1R
6L]H'1LQFK
6HQVRUPDWHULDO
0HWHURULHQWDWLRQ
(QFORVXUH
)OXLG*URXS3('/
&HUWLILFDWLRQ1R
0$:336DWr&r)76
0$:336DWr&r)76
7PHGLDPLQ
7PHGLDPD[
3URFHVVFRQQHFWLRQ
<HDURI0DQXI
6RIWZDUHYHUVLRQ
4P
K
0(31&$
+
/LQLQJ(3'0
$670$
+RUL]RQWDO+
(0,31(0$3
&DO)DFWRU
'.0,
EDUSVL
EDUSVL
r&r)
r&r)
$631
44
Figure 1-1
MAG 8000 CT nameplate example
1.2
History
The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to each
previous edition.
Edition
Remarks
11/2018
● Update for software version 3.09
● Technical data and Appendix C.2 updated
05/2014
● NMI M 10 approval for MAG 8000 Irrigation
10/2012
● Primary operation software changed from Flow Tool to PDM (Flow Tool moved to
appendix)
● Qualification Certificate functionality added
03/2010
● Integration of MAG 8000 for irrigation applications
● Restructuring of the document
1.3
Further Information
Product information on the Internet
The Operating Instructions are available on the documentation disk shipped with the device,
and on the Internet on the Siemens homepage, where further information on the range of
SITRANS F flowmeters may also be found:
Product information on the internet (
http://www.siemens.com/flowdocumentation
)
Worldwide contact person
If you need more information or have particular problems not covered sufficiently by these
Operating Instructions, get in touch with your contact person. You can find contact information
for your local contact person on the Internet:
Introduction
1.3 Further Information
SITRANS MAG 8000
8
Operating Instructions, 11/2018, A5E03071515-AE