Setting parameters
The meter information is password-protected. The default factory password is "1000" and can
be changed after gaining access to the meter. The password can be reset using a hardware
key, see Data protection (Page 55).
Read, write, print or export meter data
A single parameter or a parameter group to be read, written, printed or exported to a CSV file.
Only parameters (data) shown on white background can be changed. Red texts are off-line
data which are not stored in the MAG 8000 yet, whereas black texts show the actual meter
data.
Each parameter has a description (prompt) advising how the parameter can be programmed
and which settings are programmable.
The figure below shows alarm status with the marked alarms enabled.
Flow Tool
A.4 Setting the basic parameters
SITRANS MAG 8000
Operating Instructions, 11/2018, A5E03071515-AE
119