Configuration
17
Siemens Building Technologies
SISTORE AX4_EN.doc
Fire & Security Products
09.2004
3.4
Quick Setup Screen
Fig. 20
Quick Setup screen.
The Quick Setup screen allows you to set up the most commonly used features of
your DVR. Use the arrow buttons to move through the options. Pressing the
button lets you make your selections.
Highlight the box beside Quick Setup and press the
button to toggle between
On and Off. If you select Off, you will use the Normal Setup screen to change the
DVR’s settings.
Highlight the first box beside Recording Speed/Quality, and select recording
speeds from as few as 0.5 ips to as fast as 30 ips (25 ips for PAL).
NOTE:
The DVR has a maximum recording speed of 30 ips per camera; however, the recording speed may
not be achieved when averaged over all cameras.
Highlight the second box beside Recording Speed/Quality, and select from Very
High, High, Standard and Low.
Highlight the box beside Audio Recording and select either On or Off.
NOTE:
It is the user’s responsibility to determine if local laws and regulations permit recording audio.
Highlight the box beside Sequence Dwell Time and select from 3 to 60 seconds for
the camera sequence dwell time.
Selecting System Information enters a screen where you can set up system
information.
Selecting Storage Check enters a screen where you can check the storage status.
Selecting Camera… enters a screen where you can set up camera information.
Selecting Network Setup… enters a screen where you can set up network
information.
Selecting Password… enters a screen where you will be able to change passwords.
Selecting Date/Time… enters a screen where you will be able to set the DVR’s
time and date.
Selecting System Shutdown shuts the DVR down. When shutting down the DVR,
you need to confirm that you want to shut down the unit, you will be asked for an
administrator password.
NOTE:
The
Quick Setup
mode will be released automatically w hen the user changes the DVR settings
remotely using the RAS (Remote Administration System) program.
