Configuration
25
Siemens Building Technologies
SISTORE AX4_EN.doc
Fire & Security Products
09.2004
Your DVR shows the conditions of Hard Disk Drives when the installed IDE hard
disk drives support S.M.A.R.T. (Self-Monitoring, Analysis and Reporting
Technology) Monitoring program. Highlight the box beside Use. Press the
button to toggle between On and Off.
The Last-check field shows the date and time information of the last storage check.
Highlight the box beside Period, and select from Daily, Weekly or Monthly for the
checking period.
NOTE:
When selecting
Weekly
and
Monthly
, the
Day of Week
and
Day of Month
field will be activated under
the Period field. Select the check day or check date.
Highlight the box beside Check Time, and adjust the numbers using arrow buttons.
Highlight the box beside Temperature Threshold and adjust the numbers using
arrow buttons.
Highlight the box beside Sensor Unit and select from Celsius or Fahrenheit.
If you want to check the storage status instantly, highlight Check Now and press
the
button.
You can save your changes by highlighting OK and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
3.5.5
System Log Screen
Highlight System Log in the Main menu and press the
button. The System Log
screen appears.
Fig. 32
System Log screen.
The System Log screen displays a record of various events logged by the DVR.
The list shows the dates and times the system was turned ON and OFF, system
was restarted, recording was started or stopped, playback was started or stopped,
setup changes were made, and data banks were cleared.
The events are listed from the most recent to the oldest. You can scroll through
the list a page at a time by selecting the Up and Down arrow buttons and pressing
the
button. You can go directly to an event number by highlighting the event
number box (left of the UP arrow), pressing the
button, using the arrow buttons
to change the number, and pressing the
button.
3.5.6
System Shutdown
Highlight System Shutdown in the Main menu and press the
button. This shuts
the DVR down. When shutting down the DVR, you need to confirm that you want
to shut down the unit, and you will be asked for an administrator password.
