Configuration
22
Siemens Building Technologies
SISTORE AX4_EN.doc
Fire & Security Products
09.2004
Highlight the box beside Automatic Time Sync and press the
button. This
toggles between On and Off.
Highlight the box beside SNTP Server and press the
button. Change the
numbers by highlighting them and using the Up and Down arrow buttons to
increase or decrease the number value.
Highlight the box beside Interval and press the
button. Set the time interval for
synchronization from 30 to 300 minutes.
The box beside System Clock displays the DVR's time setting.
The box beside Server Clock displays the time setting of the time server.
Highlighting the Update button and pressing the
button updates the server clock.
NOTE:
The
Server Clock
will display “ – ” when the DVR cannot load the time information from the time
server.
The box beside Next Synchronization displays the time when the next
synchronization is scheduled. If you want to synchronize the time instantly,
highlight the Now… button and press the
button.
CAUTION:
When selecting
Now…
, any video with a later time and date will be lost if the time and date of a time
server is earlier than the last recorded image of the DVR.
NOTE:
When the time difference between the DVR and the time server is more than one minute, the DVR
might not synchronize the time to prevent any unexpected loss of recorded video data. If you want to
synchronize the time manually, select
Now…
.
Highlight the Run as Server box and press the
button. Pressing the
button
toggles between On and Off. When it is On, the DVR you are setting up will run as
a time server.
You can save your changes by highlighting OK and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
Highlight the box beside Date Format and press the
button. A list of date
formats appears. Highlight the format you wish to use and press the
button.
The choices are:
l
MM-DD-YYYY
l
DD-MM-YYYY
l
YYYY-MM-DD
l
MM/DD/YYYY
l
DD/MM/YYYY
l
YYYY/MM/DD
To change the time format, highlight the box beside Time Format and press the
button. The DVR toggles between 12 Hours (AM/PM) and 24 Hours (military time).
You can save your changes by highlighting OK and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
