Siemens SISTORE AX4 User Manual Download Page 59

Page: 59 / 70

Operation

Siemens Building Technologies

SISTORE AX4_EN.doc

Fire & Security Products

09.2004

4.5.4

Quad/Seq Button

When playing back video, you can change the display format from full screen to
quad (2x2) mode by pressing the

Quad/Seq

button. However, changing the display

format from quad (2x2) to full screen is not available.

NOTE:

When playing recorded video at maximum speed with very high image quality, playback of recorded
audio may be interrupted occasionally.

4.5.5

Digital Zoom Playback Mode

You can enter the Digital Zoom Playback mode by pressing the

PTZ

button in the

Playback mode. Once you press the

PTZ

button in the playback mode, the image

pauses and a bright small box is laid over the image. This box indicates the spot to
be enlarged.

Move the position of the box using the arrow buttons, and press the

button to enlarge that spot. The enlarged screen displays

. Pressing the

PTZ

button again releases the Digital Zoom Playback mode and returns to the playback
mode.

Fig. 74

Digital Zoom screen.

Fig. 75

Enlarged Digital Zoom screen.

Summary of Contents for SISTORE AX4







































































Search results

Summary of Contents for SISTORE AX4

Reviews:

Related manuals for SISTORE AX4

Brands by name

Popular brands

Siemens SISTORE AX4, User Manual

Search results

Summary of Contents for SISTORE AX4

Reviews:

Related manuals for SISTORE AX4

Brands by name

Popular brands